Featured products
$3.76
$5.79
A flat kit, laser cut from heavy chipboard to make a little table with swirly flourishes.
Easy to assemble using any type of craft glue. Finished size is 3" tall, 2-1/2" wide and 1-1/2" deep.
La ...
A flat kit, laser cut from heavy chipboard to make a little table with swirly flourishes.
Easy to assemble using any type of craft glue. Finished s...
$3.44
$5.29
A flat kit, laser cut from heavy chipboard to make a nostalgic sewing table, in 1:12 scale.
Easy to assemble using any type of craft glue. Finished size is approx. 2-1/2" tall, 2-3/4" wide and 1-5/...
A flat kit, laser cut from heavy chipboard to make a nostalgic sewing table, in 1:12 scale.
Easy to assemble using any type of craft glue. Finished...
$9.42
$14.49
5" long (including the handle portion), 5-3/4" tall, and 2" deep (without counting the wheel axles).
Laser-cut heavy chipboard, plus dowels for the axle and handle). Ships flat but a breeze to put ...
5" long (including the handle portion), 5-3/4" tall, and 2" deep (without counting the wheel axles).
Laser-cut heavy chipboard, plus dowels for the...
$6.82
$10.49
I was looking around for a narrow fireplace in 1:12 scale... one sized for a Victorian bedroom. But I found nothing. So I designed one!
This fireplace can used alone, or with the Fireplace Basket s...
I was looking around for a narrow fireplace in 1:12 scale... one sized for a Victorian bedroom. But I found nothing. So I designed one!
This firepl...
$6.82
$10.49
Cute little bookcase, laser-cut from chipboard and super easy to put together (with just a bit of white glue).
Stands 7" tall (and the open space in the shelves is 1-5/8" tall).
This item is in Dol...
Cute little bookcase, laser-cut from chipboard and super easy to put together (with just a bit of white glue).
Stands 7" tall (and the open space i...
$6.82
$10.49
A bookcase with a working drawer at the bottom (plus a pretty scalloped edge at both the top and down the sides).
Laser-cut from heavy chipboard (so nice and sturdy). Ships flat but a breeze to put...
A bookcase with a working drawer at the bottom (plus a pretty scalloped edge at both the top and down the sides).
Laser-cut from heavy chipboard (s...
$1.94
$2.99
Such a useful little stool! Based on a design from 19th century French campaign furniture. Approx 1.5" tall.
Laser-cut from thick chipboard and super easy to put together (with just a bit of white ...
Such a useful little stool! Based on a design from 19th century French campaign furniture. Approx 1.5" tall.
Laser-cut from thick chipboard and sup...
$2.92
$4.49
A useful little shelf unit. Includes tiny holes at the bottom for adding Tiny Wooden Drawer Knobs or Pulls but the holes can easily be ignored or papered over if not needed. Note: the knobs fit pre...
A useful little shelf unit. Includes tiny holes at the bottom for adding Tiny Wooden Drawer Knobs or Pulls but the holes can easily be ignored or p...
$3.76
$5.79
This piece was designed to fit inside the Narrow Victorian Fireplace, but you could also use it as a stand-alone item.
Also shown with the Glowing Embers Set in some of the photos. Note the window ...
This piece was designed to fit inside the Narrow Victorian Fireplace, but you could also use it as a stand-alone item.
Also shown with the Glowing ...
$3.44
$5.29
A chipboard window with depth built in (to put LED lights inside) but still shallow enough to use inside a book nook. Includes tiny holes in 2 sides to allow wires in/out (see the extra photos abov...
A chipboard window with depth built in (to put LED lights inside) but still shallow enough to use inside a book nook. Includes tiny holes in 2 side...
$1.49
$2.29
A useful little set of steps designed to display products in a 1:12 scale market stall. This is a laser-cut chipboard set of parts. The finished size is approx. 4" wide x 1-3/4" tall x 1-3/4" deep ...
A useful little set of steps designed to display products in a 1:12 scale market stall. This is a laser-cut chipboard set of parts. The finished si...
$1.49
$2.29
A solid box (all 6 sides are solid) meant to replace the Library Table (as a base for the 3 Panel Hutch or the Storage Hutch — both shown in photos above).
AKA: the same height, depth and width as ...
A solid box (all 6 sides are solid) meant to replace the Library Table (as a base for the 3 Panel Hutch or the Storage Hutch — both shown in photos...
$5.84
$8.99
A set of flat, heavy chipboard pieces to make a little table with cubbies for books. 4" wide and a bit under 2-1/2" tall (designed a little shorter than standard 1:12 scale table size so you can ad...
A set of flat, heavy chipboard pieces to make a little table with cubbies for books. 4" wide and a bit under 2-1/2" tall (designed a little shorter...
$5.84
$8.99
A laser-cut chipboard kit to make a sweet little chair or throne.
3-1/4" tall.
Ships flat, but easy to put together with a bit of glue.
Design Team Member Shannon Cooper made an Autumn Throne (see ...
A laser-cut chipboard kit to make a sweet little chair or throne.
3-1/4" tall.
Ships flat, but easy to put together with a bit of glue.
Design Team...
$12.99
$19.99
I'm kinda in love with this one. A flat kit, laser cut from heavy chipboard for a secretary, including letter slots behind the fold-up desk. Approx. 6-3/4" tall.
This item is in Dollhouse 1:12 Scal...
I'm kinda in love with this one. A flat kit, laser cut from heavy chipboard for a secretary, including letter slots behind the fold-up desk. Approx...
$5.19
$7.99
Cute little cabinet! It could also be a wardrobe or armoire.
Including the facade, it's 6-1/2" tall (the space in the inside "box" is almost 5" tall x 3-3/4" wide x 1-1/4" deep). Ships flat, but ea...
Cute little cabinet! It could also be a wardrobe or armoire.
Including the facade, it's 6-1/2" tall (the space in the inside "box" is almost 5" tal...
$3.24
$4.99
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions approx. 1-1/8" x 1-1/8".
Sold individually.
Shown in ...
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions app...
$6.04
$9.29
So sweet! A chipboard kit to make a reproduction of a vintage thread side table.
Note the double top door (the smaller, inset layer on the inside would have been covered with felt for stashing pins...
So sweet! A chipboard kit to make a reproduction of a vintage thread side table.
Note the double top door (the smaller, inset layer on the inside w...
$9.09
$13.99
A cute little cabinet designed to fit in a corner.
Includes a set of windowpane doors but you can also use it without them. Note the petite door handles shown in the photos above (and linked below)...
A cute little cabinet designed to fit in a corner.
Includes a set of windowpane doors but you can also use it without them. Note the petite door ha...
$1.94
$2.99
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions approx. 1-1/8" x 1-1/8".
Sold individually.
Shown in ...
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions app...
$1.62
$2.49
A sturdy little box with a short back (to keep tiny cushions from falling off). Fits perfectly under the 5 Inch Tall Double Windowpane Windows, like in Rhonda's artwork below.
Also shown above with...
A sturdy little box with a short back (to keep tiny cushions from falling off). Fits perfectly under the 5 Inch Tall Double Windowpane Windows, lik...
$2.27
$3.49
A tiny little house-shaped shadowbox, cut from medium-weight chipboard and easy to put together (with just a bit of white glue). Flat on the back (for hanging on a wall but can also be freestanding...
A tiny little house-shaped shadowbox, cut from medium-weight chipboard and easy to put together (with just a bit of white glue). Flat on the back (...
$4.09
$6.29
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions approx. 1-1/8" x 1-1/8".
Sold individually.
Shown in ...
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions app...
$2.46
$3.79
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions approx. 1-1/8" x 1-1/8".
Sold individually.
Shown in ...
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions app...
$1.62
$2.49
This is a laser-cut chipboard set of parts, designed as the base for the Stairstep Tabletop Display (so 4" wide and 2-1/2" deep; 3" tall as imagined as a market stall display table for a standing 1...
This is a laser-cut chipboard set of parts, designed as the base for the Stairstep Tabletop Display (so 4" wide and 2-1/2" deep; 3" tall as imagine...
$4.87
$7.49
Based on 2 larger cabinets (linked below) but sized for 1:12 scale bottles. Inspired by vintage traveling salesmen's sample cases.
Note there are no working drawers inside but see the matching 1:12...
Based on 2 larger cabinets (linked below) but sized for 1:12 scale bottles. Inspired by vintage traveling salesmen's sample cases.
Note there are n...
$2.92
$4.49
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions approx. 1-1/8" x 1-1/8".
As this design has no back w...
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions app...
$3.76
$5.79
This stand is 5" tall x 4" wide (but only 2" deep): an oval shape, which gives extra room for potted plants on the sides, but still shallow enough for a room box.
Also shown above with the Half Sca...
This stand is 5" tall x 4" wide (but only 2" deep): an oval shape, which gives extra room for potted plants on the sides, but still shallow enough ...
$2.27
$3.49
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions approx. 1-1/8" x 1-1/8".
As this design has no back w...
A flat kit to put together a tiny little shadowbox! Ships flat, but easy to put together with a bit of glue. Approx. 1" deep. Inside dimensions app...
$1.49
$2.29
A sturdy little box with a short back (to keep tiny cushions from falling off). 3" wide (2" tall including the back; 1-1/2" deep). Also shown above with 4 Inch Wide Window Seat.
Matches the width o...
A sturdy little box with a short back (to keep tiny cushions from falling off). 3" wide (2" tall including the back; 1-1/2" deep). Also shown above...